User manual

Publication date: Feb., 2013
Revision A3
163
Parameter description:
z Port :
The logical port for the settings contained in the same row. Click on the port number in
order to configure the schedulers.
z Mode :
Shows the scheduling mode for this port.
z Weight (Qn) :
Shows the weight for this queue and port.
z Scheduler Mode :
Controls whether the scheduler mode is "Strict Priority" or "Weighted" on this switch port.
z Queue Shaper Enable :
Controls whether the queue shaper is enabled for this queue on this switch port.
z Queue Shaper Rate :
Controls the rate for the queue shaper. The default value is ?. This value is restricted to ?-
1000000 when the "Unit" is "kbps", and it is restricted to 1-? when the "Unit" is "Mbps".
z Queue Shaper Unit :
Controls the unit of measure for the queue shaper rate as "kbps" or "Mbps". The default
value is "kbps".
z Queue Shaper Excess :
Controls whether the queue is allowed to use excess bandwidth.
z Queue Scheduler Weight :
Controls the weight for this queue. The default value is "17". This value is restricted to 1-
Ifyouselectthescheduler
modewithweightedthen
thescreenwillchangeas
thefigure.