User manual

User Manual
Publication date: Feb., 2013
Revision A3
160
3-14.2 Port Policing
This section provides an overview of f QoS Ingress Port Policers for all switch ports The Port
Policing is useful in constraining traffic flows and marking frames above specific rates.
Policing is primarily useful for data flows and voice or video flows because voice and video
usually maintains a steady rate of traffic
Web Interface
To display the QoS Port Schedulers in the web interface:
1. Click Configuration, QoS, Port Policing
2. Evoke which port need to enable the QoS Ingress Port Policers and type the Rate limit
condition.
3. Scroll to select the Rate limit Unit with kbps, Mbps, fps and kfps.
4. Click Save to save the configuration.
Figure 3-14.2: The QoS Ingress Port Policers Configuration
Parameter description:
z Port :
The logical port for the settings contained in the same row. Click on the port number in
order to configure the schedulers.
z Mode :
To evoke which Port you need to enable the QoS Ingress Port Policers function. Controls
whether the policer is enabled on this switch port.
z Rate :
Controls the rate for the policer. The default value is 500. This value is restricted to 100-
1000000 when the "Unit" is "kbps" or "fps", and it is restricted to 1-1000 when the "Unit" is
"Mbps" or "kfps".
z Unit :
To scroll to select what unit of rate includes kbps, Mbps, fps and kfps. The default is kbps.
z Flow Control :
To evoke to enable or disable flow control on port.