User manual

User Manual
Publication date: Feb., 2013
Revision A3
156
z GVRP rrole:
1. GVRP Mode
This configuration is to enable/disable GVRP Mode on particular port locally.
z Disable: Select to Disable GVRP mode on this port.
z Enable: Select to Enable GVRP mode on this port.
The default value of configuration is disabled.
2. GVRP rrole
This configuration is used to configure restricted role on an interface.
z Disable: Select to Disable GVRP rrole on this port.
z Enable: Select to Enable GVRP rrole on this port.
The default configuration is disabled.
z Auto-refresh :
To evoke the auto-refresh icon then the device will refresh the information automatically.
z Upper right icon (Refresh):
You can click them for refresh the GVRP Global configuration information by manual.
z Buttons:
Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.