User manual

Publication date: Feb., 2013
Revision A3
147
An abstract illustration to above application:
Configure Steps:
Step 1: Create VLAN 20 and VLAN 40
Configure Port 3 .Port 4 and Port 8 are belong to VLAN 20
Configure Port 1 .Port 2 and Port 8 are belong to VLAN 40
Port 8 is uplink port.
The above setting is configured at SW1 (Left side) and SW2 (Right side).
Step 2: Configure PVID
Port1 and Port2 are PVID=40 and their port role are VLAN access mode.
Port3 and Port4 are PVID=20 and their port role are VLAN access mode.
The port role of Port 8 is VLAN trunk mode.
Step 3: Configure Port Type to “Unaware“ at Port1 ~ Port 4.