User manual

User Manual
Publication date: Feb., 2013
Revision A3
144
3-10.7.2 Group to VLAN
This section allows you to map an already configured Group Name to a VLAN for the selected
switch.
Web Interface
To Display Group Name to VLAN mapping table configured in the web interface:
1. Click Group Name VLAN configuration and add new entry.
2. Specify the Group Name and VLAN ID.
3. Click Save.
Figure 3-12.7.2: The Group Name of VLAN Mapping Table
Parameter description:
z Delete :
To delete a Group Name to VLAN map entry, check this box. The entry will be deleted on
the switch during the next Save
z Group Name :
A valid Group Name is a string of at most 16 characters which consists of a combination of
alphabets (a-z or A-Z) and integers (0-9), no special character is allowed. Whichever
Group name you try map to a VLAN must be present in Protocol to Group mapping table
and must not be pre-used by any other existing mapping entry on this page.
z VLAN ID :
Indicates the ID to which Group Name will be mapped. A valid VLAN ID ranges from 1-
4095.
z Port Members :
A row of check boxes for each port is displayed for each Group Name to VLAN ID mapping.
To include a port in a mapping, check the box. To remove or exclude the port from the
mapping, make sure the box is unchecked. By default, no ports are members, and all
boxes are unchecked.
z Adding a New Group to VLAN mapping entry :
Click to add a new entry in mapping table. An empty row is added to the table, the Group