User manual

Publication date: Feb., 2013
Revision A3
131
Parameter description:
z Ethertype for Custom S-ports :
This field specifies the ether type used for Custom S-ports while s-custom-port enabled.
This is a global setting for all the Custom S-ports. Custom Ethertype enables the user to
change the Ethertype value on a port to any value in order to support network devices
which do not use the standard 0x8100 Ethertype field value on 802.1Q-tagged or 802.1p-
tagged frames.
z Port :
Indicate the port number of each port.
z Port Type :