User manual

User Manual
Publication date: Feb., 2013
Revision A3
130
Parameter description:
z Delete :
To delete a VLAN entry, check this box and the entry will be deleted on the selected switch.
Warning: the default VLAN 1 can be deleted. But if deleting the default VLAN 1, the
connection to the switch would be lost and some errors would occur.
z VLAN ID :
Indicates the ID of every single VLAN. Legal values for a VLAN ID are 1 to 4094.
z VLAN Name :
Indicates the name of VLAN. VLAN Name can contain alphabets, numbers, and mix of
alphabets and numbers, but exclude special characters. VLAN Name can leave blanks.
The length of VLAN name supports up to 32 characters. VLAN name can be edited for the
existing VLAN entries.
z Port Members :
A row of check boxes for each port display port members of each VLAN. To include a port
in a VLAN, tick the box. To remove or exclude the port from the VLAN, make sure the box
is unchecked.
z Adding a New VLAN :
Click to add a new VLAN group. An empty row, no port is member and all boxes are
unchecked, is added to the table to configure.
A VLAN without any port members can not be set up.
z Buttons:
Apply – Click to save changes.
Reset- Click to undo any change which is made before pressing Apply button.
Go back to the previous group configuration.
z Upper right icon (Refresh, |<<, >>):
You can click them to refresh the VLAN entries manually. Press |<< or >> to previous or
next page of the table.
3-10.2 Ports
User can configure all parameter to each port in VLAN Port Setting. This parameter involved
two parts, Ingress rule and Egress rule. The function of Port Type, Ingress Filtering, Frame
Type, and PVID affect Ingress process. Furthermore, Port Type, Egress Rule, and PVID
affect Egress process.
Web Interface
To configure VLAN Port configuration in the web interface:
1. Click VLAN Port Configuration.
2. Specify the VLAN Port Configuration parameters.
3. Click Save.
Figure 3-10.2: The VLAN Port Configuration
Web Interface
To configure VLAN Port configuration in the web interface:
1. Click VLAN Port Configuration.
2. Specify the VLAN Port Configuration parameters.
3. Click Save.
Figure 3-10.2: The VLAN Port Configuration