User manual

Publication date: Feb., 2013
Revision A3
109
3-8.2 LLDP Neighbors
This page provides a status overview for all LLDP neighbors. The displayed table contains a
row for each port on which an LLDP neighbor is detected. The columns hold the following
information:
Web Interface
To show LLDP neighbors:
1. Click LLDP Neighbors
2. Click Refresh for manual update web screen
3. Click Auto-refresh for auto-update web screen
Figure 3-8.2: The LLDP Neighbors information
NOTE: If your network without any device supports LLDP
then the table will show “No LLDP neighbor information
found”.
Parameter description:
z Local Port :
The port on which the LLDP frame was received.
z Chassis ID :
The Chassis ID is the identification of the neighbor’s LLDP frames.
z Remote Port ID :
The Remote Port ID is the identification of the neighbor port.
z System Name :
System Name is the name advertised by the neighbor unit.
z Port Description :
Port Description is the port description advertised by the neighbor unit.
z System Capabilities :
System Capabilities describes the neighbor unit's capabilities. The possible capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device