System information

SIGNAMAX a.s.
Seat: Palackeho trida 38, 612 00 Brno, CZ l Office: Vlarska 22, P. O. Box 214, 658 14 Brno, CZ
T:[phone] l F:[phone] l www.signamax.eu
62
the port x to enable it.
Add new VLAN:
Please click on <Add new VLAN> to create a new Tag-based VLAN. Input the
VLAN name as well as VID, configure the SYM-VLAN function and choose the
member by ticking the check box beside the port No., then, press the <Apply>
button to have the setting taken effect.
Fig. 3-19
Delete Group:
Just press the
<Delete>
button to remove the selected group entry from the Tag-
based group table.
Fig. 3-20
Note: If you need use PVLAN( Private VLAN) function on Switch then you need follow
up the process as below:
a. Create a VLAN as primary VLAN and the VLAN ID is 2 and evoke the Private VLAN
to enable Private VLAN service.
b. Assign port member to the VLAN2