System information
SIGNAMAX a.s.
Seat: Palackeho trida 38, 612 00 Brno, CZ l Office: Vlarska 22, P. O. Box 214, 658 14 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
59
Tag-based VLAN identifies its member by VID. This is quite different from
port-based VLAN. If there are any more rules in ingress filtering list or egress
filtering list, the packet will be screened with more filtering criteria to
determine if it can be forwarded. The switch supports supplement of 802.1q.
For more details, please see the section VLAN in Chapter 3.
Each tag-based VLAN you built up must be assigned VLAN name and VLAN
ID. Valid VLAN ID is 1-4094. User can create total up to 4094 Tag VLAN
groups.
Segment A :
The “Segment A” mode is a special function for LAN Segmentation (Converter
Mode)
application, it is working under VLAN function
.
When the segment mode
enabled, there are max. up to 12 LAN segments on the switch and fixed two ports for
each LAN segment and each LAN segment will be isolated. The fixed segment ports
mapping as below:
Segment Forwarding Port Mapping
1 Port 01
Port 09
2 Port 02
Port 10
3 Port 03 Port 11
4 Port 04 Port 12
5 Port 05 Port 13
6 Port 06 Port 14
7 Port 07
Port 15
8 Port 08
Port 16
9 Port 17
Port 18
10 Port 19
Port 20
11 Port 21
Port 22
12 Port 23 Port 24
Segment B :
The “Segment B” mode is a special function for LAN Segmentation (Converter
Mode)
application, it is working under VLAN function
.
When the segment mode
enabled, there are max. up to 12 LAN segments on the switch and fixed two ports for
each LAN segment and each LAN segment will be isolated. The fixed segment ports
mapping as below:
Segment Forwarding Port Mapping
1 Port 01
Port 02
2 Port 03
Port 04
3 Port 05
Port 06
4 Port 07 Port 08
5 Port 09 Port 10
6 Port 11 Port 12
7 Port 13 Port 14
8 Port 15
Port 16
9 Port 17
Port 18
10 Port 19
Port 20
11 Port 21
Port 22
12 Port 23 Port 24
The ports in the same LAN segment will forward any packet in the same segment
ports, the received packets will be forwarded to the same segment port member
without any change (for example: VLAN tag or un-tag frames). The L2 PDU will