System information

SIGNAMAX a.s.
Seat: Palackeho trida 38, 612 00 Brno, CZ l Office: Vlarska 22, P. O. Box 214, 658 14 Brno, CZ
T:[phone] l F:[phone] l www.signamax.eu
34
3-1-2. Account Configuration
In this function, only administrator can create, modify or delete the username and
password. Administrator can modify other guest identities’ password without confirming the
password but it is necessary to modify the administrator-equivalent identity. Guest-equivalent
identity can modify his password only. Please note that you must confirm administrator/guest
identity in the field of Authorization in advance before configuring the username and
password. Only one administrator is allowed to exist and unable to be deleted. In addition, up
to 4 guest accounts can be created.
The default setting for user account is:
Username : admin
Password : admin
Fig. 3-5
3-1-3. Time Configuration
The switch provides manual and automatic ways to set the system time via NTP.
Manual setting is simple and you just input “Year”, “Month”, “Day”, “Hour”, “Minute” and
“Second” within the valid value range indicated in each item. If you input an invalid value, for
example, 61 in minute, the switch will clamp the figure to 59.
NTP is a well-known protocol used to synchronize the clock of the switch system time
over a network. NTP, an internet draft standard formalized in RFC 1305, has been adopted
on the system is version 3 protocol. The switch provides four built-in NTP server IP
addresses resided in the Internet and an user-defined NTP server IP address. The time zone
is Greenwich-centered which uses the expression form of GMT+/- xx hours.
Function name:
Time
Function description:
Set the system time by manual input or set it by syncing from Time servers. The
function also supports daylight saving for different area’s time adjustment.