System information

SIGNAMAX a.s.
Seat: Palackeho trida 38, 612 00 Brno, CZ l Office: Vlarska 22, P. O. Box 214, 658 14 Brno, CZ
T:[phone] l F:[phone] l www.signamax.eu
30
• The Information of Page Layout
⎯
On the top side, it shows the front panel of the switch. In the front panel, the linked ports
will display green; as to the ports, which are link off, they will be dark. For the optional
modules, the slot will show only a cover plate if no module exists and will show a
module if a module is present. The image of module depends on the one you inserted.
The same, if disconnected, the port will show just dark, if linked, green. (See Fig. 3-3)
Fig. 3-3 port detail information
In Fig. 3-3, it shows the basic information of the clicked port. With this, you’ll see the
information about the port status, traffic status and bandwidth rating for egress and ingress
respectively.
⎯ On the left-top corner, there is a pull-down list for Auto Logout. For the sake of security,
we provide auto-logout function to protect you from illegal user as you are leaving. If you
do not choose any selection in Auto Logout list, it means you turn on the Auto Logout
function and the system will be logged out automatically when no action on the device 3
minutes later. If OFF is chosen, the screen will keep as it is. Default is ON.
⎯
On the left side, the main menu tree for web is listed in the page. They are hierarchical
menu. Open the function folder, a sub-menu will be shown. The functions of each folder
are described in its corresponded section respectively. When clicking it, the function is
performed. The following list is the full function tree for web user interface.