System information

SIGNAMAX a.s.
Seat: Palackeho trida 38, 612 00 Brno, CZ l Office: Vlarska 22, P. O. Box 214, 658 14 Brno, CZ
T:[phone] l F:[phone] l www.signamax.eu
18
• Set IP Address, Subnet Mask and Default Gateway IP Address
Please refer to Fig. 2-7 CLI Management for details about ex-factory IP setting. They
are default setting of IP address. You can first either configure your PC IP address or change
IP address of the switch, next to change the IP address of default gateway and subnet mask.
For example, your network address is 10.1.1.0, and subnet mask is 255.255.255.0.
You can change the switch’s default IP address 192.168.1.1 to 10.1.1.1 and set the subnet
mask to be 255.255.255.0. Then, choose your default gateway, may be it is 10.1.1.254.
Default Value 065-7851 Your Network Setting
IP Address
192.168.1.1
10.1.1.1
Subnet
255.255.255.0 255.255.255.0
Default Gateway
192.168.1.254 10.1.1.254
Table 2-3
After completing these settings in the switch, it will reboot to have the configuration
taken effect. After this step, you can operate the management through the network, no matter
it is from a web browser or Network Management System (NMS).
Fig. 2-8 the Login Screen for CLI