System information

SIGNAMAX a.s.
Seat: Palackeho trida 38, 612 00 Brno, CZ l Office: Vlarska 22, P. O. Box 214, 658 14 Brno, CZ
T:[phone] l F:[phone] l www.signamax.eu
190
3-15-7 Group Allow
Function name:
Group Allow
Function description:
The Group Allow function allows the IGMP Snooping to set up the IP multicast table
based on user’s specific conditions. IGMP report packets that meet the items you set up
will be joined or formed the multicast group.
Fig. 3-163-3
Group Allow
Parameter description:
MVID:
The switch supports two kinds of options for managed valid VLAN VID, including
“Client” and “router”. Default is “disable”. When you choose “Custom”, you can fill
in VID number. The valid VID range is 1~4094.
(Start Address to End Address )IP Range:
The switch supports two kinds of options for managed valid IP range, you can
assigned effective IP range. The valid range is 224.0.0.0~239.255.255.255.
Add:
A new entry of
allowed group
configuration can be created after the parameters as
mentioned above had been setup and then press <Add> button.
Edit:
The existed entry also can be modified after pressing
<Edit>
button.
Delete:
Remove the existed entry of allowed group configuration from the allowed group.