System information

SIGNAMAX a.s.
Seat: Palackeho trida 38, 612 00 Brno, CZ l Office: Vlarska 22, P. O. Box 214, 658 14 Brno, CZ
T:[phone] l F:[phone] l www.signamax.eu
1
6
7
3-12-2. Configuration
The STP, Spanning Tree Protocol, actually includes RSTP. In the Spanning Tree
Configuration, there are six parameters open for the user to configure as
user’s idea. Each parameter description is listed below.
Function name:
STP Configuration
Function description:
User can set the following Spanning Tree parameters to control STP function
enable/disable, select mode RSTP/STP and affect STP state machine behavior to send
BPDU in this switch. The default setting of Spanning Tree Protocol is “Disable”.
Fig. 3-151 STP Configuration
Parameter description:
Spanning Tree Protocol:
Set 802.1W Rapid STP function Enable / Disable. Default is “Disable”
Bridge Priority:
The lower the bridge priority is, the higher priority it has. Usually, the bridge with
the highest bridge priority is the root. If you want to have the 065-7851 as root
bridge, you can set this value lower than that of bridge in the LAN. The valid
value is 0 ~ 61440. The default is 32768.
Hello Time: