System information

SIGNAMAX a.s.
Seat: Palackeho trida 38, 612 00 Brno, CZ l Office: Vlarska 22, P. O. Box 214, 658 14 Brno, CZ
T:[phone] l F:[phone] l www.signamax.eu
162
LACP:
A port use LACP as its trunk method to get aggregated with other ports also
using LACP.
Static:
A port use Static Trunk as its trunk method to get aggregated with other ports
also using Static Trunk.
Group:
Ports choosing the same trunking method other than “None” must be assigned a
unique Group number
(i.e. Group ID, valid value is from 1 to 8)
in order to
declare that they wish to aggregate with each other.
Active LACP:
This field is only referenced when a port’s trunking method is LACP.
Active:
An Active LACP port begins to send LACPDU to its link partner right after the
LACP protocol entity started to take control of this port.
Passive:
A Passive LACP port will not actively send LACPDU out before it receives an
LACPDU from its link partner.
Aggtr:
Aggtr is an abbreviation of “aggregator”. Every port is also an aggregator, and its
own aggregator ID is the same as its own Port No. We can regard an aggregator
as a representative of a trunking group. Ports with same Group ID and using same
trunking method will have the opportunity to aggregate to a particular aggregator
port. This aggregator port is usually the port with the smallest Port No. within the
trunking group.
Status:
This field represents the trunking status of a port which uses a trunking method
other than “None”. It also represents the management link status of a port which
uses the “None” trunking method. “---“ means “not ready”