System information

SIGNAMAX a.s.
Seat: Palackeho trida 38, 612 00 Brno, CZ l Office: Vlarska 22, P. O. Box 214, 658 14 Brno, CZ
T:[phone] l F:[phone] l www.signamax.eu
150
8. If user ID and password is correct, the authentication server will send a
Radius-Access-Accept to the authenticator. If not correct, the authentication
server will send a Radius-Access-Reject.
9. When the authenticator PAE receives a Radius-Access-Accept, it will send
an EAP-Success to the supplicant. At this time, the supplicant is authorized
and the port connected to the supplicant and under 802.1X control is in the
authorized state. The supplicant and other devices connected to this port can
access the network. If the authenticator receives a Radius-Access-Reject, it
will send an EAP-Failure to the supplicant. This means the supplicant is
failed to authenticate. The port it connected is in the unauthorized state, the
supplicant and the devices connected to this port won’t be allowed to access
the network.
10. When the supplicant issue an EAP-Logoff message to Authentication server,
the port you are using is set to be unauthorized.
Fig. 3-55
Access allowed
PC
LAN
Bridge
Radius Server
Access blocked
Port connect
Radius-Access-Challenge
Radius-Access-Accept
Radius-Access-Request
Radius-Access-Request
E
APOL-Star
t
EAP-Response/Identity
EAP-Response (cred)
EAP-Request/Identity
EAP-Request
EAP-Success
EAP-Failure
E
APOL
E
A
P
A
uthenticato
r
R
adius
EAP-Logof
f