User`s guide

Signamax 065-7840 24-Port 10/100/1000BaseT/TX Managed Switch
56
Function name:
Per Port Priority
Function description:
Allows assignment of QoS Priority High and Low for each port. For example, if
IP packets are transmitted from Port 2 and Port 3 at the speed of 1 Gbps to
Port 1, and the Class of Port 2 is set as High and Port 3 is set as Low, then the
packets of Port 3 will be dropped if congestion occurs because Port 2 has a
higher precedence of transmitting packets.
Parameter description:
Port No:
User can choose the port (1~24) respectively with Priority Class on Per
Port Priority function.
Class:
User can set up High Priority or Low Priority for each port respectively.
Fig. 3-15