User`s guide

Signamax

™

065-7727S 24-Port 10/100BaseT/TX Managed Switch

Publication date: March, 2008

Revision A1

Fig. 3-36

Parameter description:

MAC:

It is a six-byte long Ethernet hardware address and usually expressed by

hex and separated by hyphens. For example,

00 – 40 - C7 - D6 – 00 - 01

VID:

VLAN identifier. This will be filled only when tagged VLAN is applied.

Valid range is 1 ~ 4094.

Queue (Priority):

Set up the priority( 0~3) for the MAC.

Forwarding Rule(Drop Policy):

Static:

A MAC address is assigned to a specific port, all of the switch’s

traffics sent to this MAC address will be forwarded to this port.

Static with Destination Drop:

While the DA of the incoming packets meets the value you set up,

these packets will be dropped.

Static with Source Drop:

While the SA of the incoming packets meets the value you set up,

these packets will be dropped.

Port :

Select the port No. you would like to do setup in the switch. It is 1 ~26.