User`s guide

Signamax







065-7726SPOE / 065-7726SPOE-FP 24-Port 10/100BaseT/TX

PoE Managed Switch User Manual

Publication date: February, 2010

Revision A1.0

3-7-3. PVID

Function name:

PVID

Function description:

In PVID Setting, user can input VID number to each port. The range of VID number is

from 1 to 4094. User also can choose ingress filtering rule (Rule 2) to each port. The

Ingress Filtering Rule 2 is “drop untagged frame”. While Rule 2 is enabled, the port will

discard all Untagged-frames.

Fig. 3-25

Parameter description:

Port 1-26:

Port number.

PVID:

This PVID range will be 1-4094. Before you set a number x as PVID, you have to

create a Tag-based VLAN with VID x. For example, if port x receives an untagged

packet, the switch will apply the PVID (assume as VID y) of port x to tag this packet,

the packet then will be forwarded as the tagged packet with VID y.

Default Priority:

It bases on 802.1p QoS and affects untagged packets. When the packets enter the

switch, it would get the priority precedence according to your Default Priority setting

and map to 802.1p priority setting in QoS function. For example, while you set

Default Priority of port 2 with 2 and transmit untagged packets to port 2, these

packets will own priority 2 precedence due to your default 802.1p Priority Mapping

setting in QoS function and be put into Queue 1.