User`s guide

Signamax







065-7726SPOE / 065-7726SPOE-FP 24-Port 10/100BaseT/TX

PoE Managed Switch User Manual

Publication date: February, 2010

Revision A1.0

Tag-based Group Configuration

Function description:

It shows the information of existed Tag-based VLAN Groups. You can also easily create,

edit and delete a Tag-based VLAN group by pressing <Add>, <Edit> and <Delete>

function buttons. User can add a new VLAN group by inputting a new VLAN name and

VLAN ID after pressing <Add> button.

Parameter description:

VLAN Name:

The name defined by administrator is associated with a VLAN group. Valid letters

are A-Z, a-z, 0-9, “ - “ and “_” characters. The maximal length is 15 characters.

VID:

VLAN identifier. Each tag-based VLAN group has a unique VID. It appears only in

tag-based and Double-tag mode.

Member:

This is used to enable or disable if a port is a member of the new added VLAN,

“Enable” means it is a member of the VLAN. Just tick the check box beside the port

x to enable it.

Fig. 3-22