User`s guide

Signamax 

 065-7726SPOE / 065-7726SPOE-FP 24-Port 10/100BaseT/TX
PoE Managed Switch User Manual
Publication date: February 2010
Revision A1.0
62
Function name:
PoE Configuration
Function description:
In PoE Port Management function, user can configure the settings about PoE.
The switch complies with IEEE 802.3af protocol and be capable of detecting automatically
that whether the device linked to the port on the switch is PD (Powered Device) or not.
The switch also manage the power supplement based on the Class of the PD, and it will
stop supplying the power once the power required by the PD excesses the Class, Short
Circuit or over temperature occurs.
Fig. 3-16
Parameter description:
Status:
Include “Normal” or “Active” two kinds of status. The former means the port is ready
to link and supply the power to the PD at any time. The latter means the port is in the
condition of supplying the power.
State:
“Enable” means the manager allows the power supplied to the PD is legal while the
port linked to the PD; “Disable” means the port does not own PoE function.