Manualshelf

User`s guide

ManualsBrandsSignaMax ManualsComputer equipment065-7726SPOE
51525354555657585960
Signamax
065-7726SPOE / 065-7726SPOE-FP 24-Port 10/100BaseT/TX
PoE Managed Switch User Manual
Publication date: February 2010
Revision A1.0
50
Speed / Duplex :
Display the speed and duplex of all port. There are three speeds 10 Mbps, 100 Mbps
and 1000 Mbps supported for TP media, and the duplex supported is half duplex and
full duplex. If the media is 1Gbps fiber, it is 1000 Mbps supported only. The status of
speed/duplex mode is determined by 1) the negotiation of both local port and link
partner in “Auto Speed” mode or 2) user setting in “Force” mode. The local port has
to be preset its capability.
In port 1 – 24, they are supported Fast Ethernet with TP media only, so the result will
show 100 m/Full or 100 m/Half, 10 m/Full and 10 m/Half duplex.
In port 25 and port 26, if the media is 1000 Mbps with TP media, it will show the
combinations of 10/100 m and Full/Half duplex, 1000 Mbps and Full duplex only. If
the media is 1000 Mbps with fiber media, it will show only 1000 m/Full duplex.
Default: None, depends on the result of the negotiation.
Rx Pause:
The way that the port adopts to process the PAUSE frame. If it shows “on”, the port
will care the PAUSE frame; otherwise, the port will ignore the PAUSE frame.
Default: None
Tx Pause:
It decides that whether the port transmits the PAUSE frame or not. If it shows “on”,
the port will send PAUSE frame; otherwise, the port will not send the PAUSE frame.
Default: None