User`s guide

Signamax 

 065-7726SPOE / 065-7726SPOE-FP 24-Port 10/100BaseT/TX
PoE Managed Switch User Manual
Publication date: February 2010
Revision A1.0
32
Fig. 3-3 port detail information
In Fig. 3-3, it shows the basic information of the clicked port. With this, you’ll see the
information about the port status, traffic status and bandwidth rating for egress and ingress
respectively.
 On the left-top corner, there is a pull-down list for Auto Logout. For the sake of security, we
provide auto-logout function to protect you from illegal user as you are leaving. If you do
not choose any selection in Auto Logout list, it means you turn on the Auto Logout function
and the system will be logged out automatically when no action on the device 3 minutes
later. If OFF is chosen, the screen will keep as it is. Default is ON.
 On the left side, the main menu tree for web is listed in the page. They are hierarchical
menu. Open the function folder, a sub-menu will be shown. The functions of each folder
are described in its corresponded section respectively. When clicking it, the function is
performed. The following list is the full function tree for web user interface.