User`s guide

Signamax 

 065-7726SPOE / 065-7726SPOE-FP 24-Port 10/100BaseT/TX
PoE Managed Switch User Manual
Publication date: February, 2010
Revision A1.0
31
3-1. Web Management Home Overview
After you login, the switch shows you the system information as Fig. 3-2. This page is
default and tells you the basic information of the system, including “Model Name”, “System
Description”, “Location”, “Contact”, “Device Name”, “System Up Time”, “Current Time”, “BIOS
Version”, “Firmware Version”, “Hardware-Mechanical Version”, “Serial Number”, “Host IP
Address”, “Host MAC Address”, “Device Port”, “RAM Size” and “Flash Size”. With this
information, you will know the software version used, MAC address, serial number, how many
ports good and so on. This is helpful while malfunctioning.
Fig. 3-2
•
••
• The Information of the Page Layout
 On the top side, it shows the front panel of the switch. In the front panel, the linked ports
will display green; as to the ports, which are link off, they will be dark. For the optional
modules, the slot will show only a cover plate if no module exists and will show a module
if a module is present. The image of module depends on the one you inserted. The same,
if disconnected, the port will show just dark, if linked, green.
In this device, there are clicking functions on the panel provided for the information of the
ports. These are very convenient functions for browsing the information of a single port.
When clicking the port on the front panel, an information window for the port will be pop
out. (See Fig. 3-3)