User`s guide

Signamax 

 065-7726SPOE / 065-7726SPOE-FP 24-Port 10/100BaseT/TX
PoE Managed Switch User Manual
Publication date: February, 2010
Revision A1.0
251
Hardware Specifications


 Standards Compliance: IEEE 802.3ab / 802.3z / 802.3u / 802.3x
802.3z and 802.3ab compliant Gigabit Ethernet ports


 Network Interface of Option transceiver:
Configuration Mode Connector Port
SFP 2-strand MM
1000 FDX *LC MM
2 (Option)
SFP 2-strand SM
1000 FDX *LC SM
2 (Option)
SFP Single-strand SM
1000 FDX
*BiDi-LC SM
2 (Option)
* : Default module


 Transmission Mode: 10/100 Mbps supports full or half duplex
1000 Mbps supports full duplex only


 Transmission Speed: 10/100/1000 Mbps for TP
1000 Mbps for Fiber


 Full Forwarding/Filtering Packet Rate: PPS (packets per second)
Forwarding Rate Speed
1,488,000 PPS 1000 Mbps
148,800 PPS 100 Mbps
14,880 PPS 10 Mbps


 MAC Address and Self-learning: 8 K address table entries,
256 VLAN table entries,
256 IP multicast table entries,


 Buffer Memory: Embedded 256 KB packet buffers and 128 KB control memory.


 Flow Control: IEEE 802.3x compliant for full duplex
Backpressure flow control for half duplex


 Cable and Maximum Length:
TP
Cat. 5 or better UTP cable, up to 100 m
1000BaseSX SC MM
Up to 220/275/500/550 m,
dependent upon Multimode Fiber type
1000BaseLX SC SM
Singlemode Fiber, up to 10/40/80/110 km
1000BaseFX WDM SC S-M
Singlemode Single Fiber, BiDi up to 10/20 km