User`s guide

Signamax 

 065-7726SPOE / 065-7726SPOE-FP 24-Port 10/100BaseT/TX
PoE Managed Switch User Manual
Publication date: February 2010
Revision A1.0
250
Appendix A
Technical Specifications
Features
• The switch includes 24-Port 10/100 Mbps TP and 2-Port Gigabit Dual Media TP/SFP ports.
• Supports 24-port 10/100 Mbps TP ports with Nway and auto MDIX function.
• 065-7726SPOE and/or 065-7726SPOE-FP switches support 2 Gigabit dual media ports
(TP/SFP) and 2 slots for removable SFP modules supporting 1000 Mbps SFP fiber modules.
• Supports on-line plug/unplugging of SFP transceiver modules.
• Non-blocking, store-and-forward and shared-memory L2 managed switch.
• Supports auto-negotiation for configuring speed, duplex mode.
• Supports 802.3x flow control for full-duplex ports.
• Supports collision-based and carrier-based backpressure for half-duplex ports.
• 256-entry Multicast Address table.
• Any ports can be in disable mode, force mode or auto-polling mode.
• Per-port ingress/egress rate control with 64K/128K/256K (up to 100 Mbps) resolution.
• Supports Head of Line (HOL) blocking prevention.
• Supports broadcast storm filtering.
• 8K MAC addresses with automatic learning and aging.
• Auto-aging with programmable inter-age time.
• Supports 802.1p Class of Service with 4-level priority queuing.
• Supports port sniffer function with 3 modes:
(TX Monitor Mode, RX Monitor Mode and TX-RX pair Monitor Mode).
• Supports port-based VLAN, 802.1Q tag-based VLAN with 256 entries.
• Efficient self-learning and address recognition mechanism enables forwarding rate at wire
speed.
• Web-based management provides the ability to completely manage the switch
from any web browser.
• SNMP/Telnet interface delivers complete in-band management.
• Supports IEEE 802.1d Spanning Tree Protocol.
• Supports IEEE 802.1w Rapid Spanning Trees.
• Supports IEEE 802.1x port-based network access control.
• Supports IP Multicasting to implement IGMP Snooping function.
• Supports 802.3ad port trunking with flexible load distribution and failover function.
• Supports ingress port security mode for VLAN Tagged and Untagged frame process.
• Supports SNMP MIB2 and RMON sampling with sampled packet error indication.
• 24 ports support IEEE 802.3af PoE PSE.
• Endpoint with 48 V DC power through RJ-45 pin 1, 2, 3, and 6.
• Powered Device (PD) auto detection and classification.
• PoE-PSE status and activity LED indicator.
• Smart feature for PD on/off, class, feeding priority.