User`s guide

Signamax 

 065-7726SPOE / 065-7726SPOE-FP 24-Port 10/100BaseT/TX
PoE Managed Switch User Manual
Publication date: February, 2010
Revision A1.0
157
logout
Syntax:
logout
Description:
When you enter this command via Telnet connection, you would logout the system and
disconnect. If you connect the system through direct serial port with RS-232 cable, you would
logout the system and be back to the initial login prompt when you run this command.
Argument:
None.
Possible value:
None.
Example:
065-7726SPOE# logout
restore default
Syntax:
restore default
Description:
To restore the startup configuration as factory default configuration. If restoring default
successfully, the CLI would prompt if reboot immediately or not. If you press Y or y, the system
would reboot immediately; others would be back to the CLI system. After restoring default
configuration, all the changes in the startup configuration would be lost. After rebooting, the
entire startup configuration would reset to factory default.
Argument:
None.
Possible value:
None.
Example:
065-7726SPOE# restore default
Restoring ...
Restore Default Configuration Successfully
Press any key to reboot system.