User`s guide

Signamax 

 065-7726SPOE / 065-7726SPOE-FP 24-Port 10/100BaseT/TX
PoE Managed Switch User Manual
Publication date: February 2010
Revision A1.0
134
Function name:
QoS Global Setting
Function description:
When you want to use the QoS function, please enable the QoS Mode in advance. Then
you can use MAC Priority, 802.1p Priority, IP TOS Priority, DiffServ DSCP Priority, or VIP
Port functions and have them take effect. In this function, you can Enable QoS Mode.
Choose any of Priority Control, such as 802.1p, TOS, DSCP. Moreover, you can select
Scheduling Method of WRR (Weighted Round Robin) or Strict Priority. Next, you can
arrange Weight values for queue 0 to queue 3.
Parameter description:
QoS Mode:
You can Enable QoS Mode and let the QoS function become effective. Default is
Disable.
Priority Control:
Just tick the check box () of 802.1P, TOS, or DSCP QoS and click Apply button to
be in operation.
Scheduling Method:
There are two Scheduling Method, WRR and Strict Priority. Default is WRR. After
you choose any of Scheduling Method, please click Apply button to be in operation.
Weight (1~55):
Over here, you can make an arrangement to Weight values of Queue 0 to Queue 3.
The range of Weight you can set is 1~55. In default, the weight of Queue 0 is 1, the
weight of Queue 1 is 2, the weight of Queue 2 is 4, and the weight of Queue 3 is 8.
Fig. 3-65