User`s guide

Signamax 

 065-7726SPOE / 065-7726SPOE-FP 24-Port 10/100BaseT/TX
PoE Managed Switch User Manual
Publication date: February 2010
Revision A1.0
126
Function name:
Isolated Group
Function description:
Isolated Group function can let the port be independent of other ports in the Isolated
group, and the communication is also forbidden between these ports. But, the ports of the
Isolated group are still able to communicate with the ports of the non-Isolated group. With
this design, it will be helpful to the administrator to immediately find and solve the port that
results in the occurrence of looping problems in the network.
Parameter description:
Mode:
Used for the activation or de-activation of Isolated Group function. Default is disable
Isolated Group:
User can choose any port to be the member of this group. Just tick the check box ()
beside the port x and valid port is Port 1~26. In this group, all of these member ports
cannot forward packets with each other. Thus, the switch will not be capable of
forwarding any packets in case its all ports become the members of the Isolated
group.
Fig. 3-60