Manualshelf

User`s guide

ManualsBrandsSignaMax ManualsComputer equipment065-7726SPOE
121122123124125126127128129130
Signamax
065-7726SPOE / 065-7726SPOE-FP 24-Port 10/100BaseT/TX
PoE Managed Switch User Manual
Publication date: February, 2010
Revision A1.0
117
3-13. Alarm Configuration
Function name:
Events Configuration
Function description:
The Trap Events Configuration function is used to enable the switch to send out the trap
information while pre-defined trap events occurred. The switch offers 22 different trap
events to users for switch management. The trap information can be sent out in three
ways, including email, mobile phone SMS (short message system) and trap. The
message will be sent while users tick () the trap event individually on the web page
shown as below.
Parameter description:
Trap: Cold Start, Warm Start, Link Down, Link Up, Authentication
Failure, User login, User logout
STP: STP Topology Changed, STP Disabled, STP Enabled
LACP: LACP Disabled, LACP Enabled, LACP Member Added, LACP Port
Failure
GVRP: GVRP Disabled, GVRP Enabled
VLAN: Port-based VLAN Enabled, Tag-based VLAN Enabled
Module Swap: Module Inserted, Module Removed, Dual Media Swapped
PoE: PoE Failure
Events Configuration
Email/SMS
Configuration
Alarm Configuration