User`s guide

SIGNAMAX LLC • www.signamax.eu
Trunk Setting: Trunk Configuration
There are two groups to choose and the maximum ports of one
group are 4. Set up port trunk group mode as below,
“Port ID” – you can select port number you want to include into
the same group.
“SA” – you can select Source Address of the port you want to
include into the same group.
“DA” – you can select Destination Address of the port you want to
include into the same group.
“SA & DA” – you can select both Source Address and Destination
Address of the port you want to include into the same group.