Installation guide

7 SIGNAMAX LLC • www.signamax.eu
SLA: CIR, PIR, CBS
Priority mapping: the mapping among 802.1p, COS, DSCP
Limited speed of Ingress port: 64Kbp particle, limit the speed
based on time period
Queue scheduling: SP, RR, WRR, WDRR
Block workaround: Tail Drop, sRED
50ms protection
Adopts Ethernet ring protection protocol (ERPP) (private standard
of Signamax);
The number of nodes on the ring is not limited;
Supports single ring, dual-ring, crossover ring, tangent ring
TDMoIP
Supports E1 and T1, up to eight 8 E1/T1 interfaces, RJ40 physical
interface;
Supports SAToP, CESoPSN, and HDLC bearing mechanisms;
Supports independent clocks, including internal clock, external
clock, loop clock and RTP clock;
Supports 64 independent TDMoIP data flow;
Compatible with ITU-T Y.1413, Y.1414, IETF PWE3;
Security IP packet filtering firewall;
Configure command grading protection to ensure that the
unauthorized users cannot log in to the switch;
MD5;
RADIUS;
TACACS;
AAA;
802.1x;
Supports IP Source Address spoofing check;
Supports LAND attack check;
Supports SYN Flood check;
Supports Smurf attack check;
Supports Ping Flood attack check;
Supports Teardrop attack check;
Supports Ping of Death attack check;
Supports Netbios/Samba filtering;
Supports port isolation;
Supports port monitoring;
Supports port security;
Supports dynamic ARP check;
Supports DHCP Snooping;
VLAN The value range of VLAN ID is 1–4094
Supports dividing VLANs based on port, protocol, MAC, and IP
address
Port VLAN type: Access, Trunk, Hybrid
Supports Super-VLAN and Sub-VLAN
QinQ Complies with IEEE 802.1ad;
Supports modifying label protocol ID;
Supports up to 1024 QinQs;
Supports selective QinQ based on C-VLAN ID;
Supports the mapping between C-VLAN and S-VLAN;
Multicast Supports IGMP Snooping;