Installation guide

5 SIGNAMAX LLC • www.signamax.eu
 TXD: the indicator for console/AUX port sending data;
 RXD: the indicator for console/AUX port receiving data;
FET0-23 (100M Ethernet port)
 LINK: the indicator of Ethernet port link, which is always on when
the link of Ethernet port is set up;
 ACT: the indicator of Ethernet port sending/receiving data, which is
flashes when data is being sent or received;
FEF8-23 (100M Ethernet port)
 LINK/ACT: the indicator of Ethernet port link, which is always on
when the link of Ethernet port is set up and flashes when data is
being sent or received;
GE24-27 (WAN 1000M Ethernet port)
 IN/OUT: the indicator of 3I3O alarm input/output; the software
control indicator is on;
 LINK/ACT: the indicator of Ethernet port link, which is always on
when the link of Ethernet port is set up and flashes when data is
being sent or received;
The interfaces on the front panels of 065-7434 Signamax 24-Port 10/100
L3 Switch
Device Type
Interface
Interface
Type
Description
065-7434 Signamax 24-Port
10/100 L3 switch
CON/AUX RJ45 Console port
FET RJ45
24 100M Ethernet electric
ports
GEF RJ45
Four 1000M Ethernet
optical ports
3I3O RJ45
Three input and three
output alarm signals
065-7434 Signamax 24-Port 10/100 L3 Switch System
The basic configurations and working environment of 065-7434
Signamax 24-Port 10/100 L3 Switch are described as follows:
The system of 065-7434 Signamax 24-Port 10/100 L3 Switch:
Item Description
CON/AUX port RJ45, asynchronous DTE working mode
100M Ethernet electric port 100M fast Ethernet port (RJ45)
100M Ethernet optical port 100M Ethernet optical interface (SFP)
1000M Ethernet optical port 1000M Ethernet optical interface (SFP)
E1/T1 interface E1/T1 interface (RJ45)
CLK interface 2M/25M clock input