Installation guide

4 SIGNAMAX LLC • www.signamax.eu
three-color mode (srTCM) and dual-rate three-color mode (trTCM) to
meet the SLA requirements of carriers, including CIR, CBS and PIR.
 L2/L3 multicast
065-7434 Signamax 24-Port 10/100 L3 Switch supports 1024 concurrent
multicast data flow; IGMP snooping and IGMP fast-adding/leaving
protocol.
 Powerful anti-attack checking capability
065-7434 Signamax 24-Port 10/100 L3 Switch supports LAND, SYN Flood,
Smurf, Ping Flood, Teardrop and Ping of Death and defines the processing
policies for attack packets to ensure the device and network security.
 Various authentication modes
065-7434 Signamax 24-Port 10/100 L3 Switch supports PPPOE and
802.1x access authentication modes, and Radius and TACAS+ protocols
to meet the requirements of carriers’ access authentication, authorization
and accounting for customers.
Hardware Features
Front Panel of 065-7434 Signamax 24-
Port 10/100 L3 Switch
Front panel of 065-7434 Signamax 24-Port 10/100 L3 Switch
The above are the front panels of 065-7434 Signamax 24-Port 10/100 L3
Switches. The meanings of the indicators on the panels are as follows:
SYS & PWR & FAN (system, power and fan indicators)
 SYS: system status indicator, which flashes slowly after successful
system loading;
 MASTER: system power indicator, which is on when the right (taking
the power panel as the reference side) 5V power works normally;
 SLAVE: system power indicator, which is on when the left (taking the
power panel as the reference side) 5V power works normally;
 FAN: system fan indicator, which is reserved for checking 3-wire fan
status (when the indicator is off, the fan works abnormally; when it
is on, the fan works normally); when the 2-wire fan is adopted, the
indicator is always on.
CON/AUX (console/AUX port)