Installation guide

18 SIGNAMAX LLC • www.signamax.eu
Install Switch
Install 065-7434 Signamax 24-Port 10/100 L3 switch in the cabinet:
Step 1: Wear gloves and anti-static wrists, and make the anti-wrists well
grounded;
Step 2: Place the device on the fixed platform; make the installation
holes of the brackets aim at the corresponding holes of the device sides;
use the bolts to fix the brackets on the two sides of the device, as follows.
Bracket
Step 3: Make the front of the device face the operator. Use two hands to
hold the device and keep the device horizontal. Be careful to place the
device on the pallets or brackets from the cabinet front. When placing
the device, avoid the collision between the shelf and the cabinet. For
heavier or higher device, two persons should cooperate to perform the
operation.
Step 4: Use two hands to push the device into the cabinet and make the
brackets of the device close to the surface of the cabinet column.
Step 5: Use the fixe d screws to install the device on the column of the cabinet
as follows.
Installing switch to cabinet
Step 6: Check whether the device is installed fixedly and straight.
Step 7: Check the spaces between the installed devices. Select the
appropriate baffle boards (standard accessories of the shelf) to place in
the spaces between the devices; use the bolts to fix the baffle boards on
the shelf.