Installation guide

17 SIGNAMAX LLC • www.signamax.eu
The device must be installed on the pallets or trays (used in pairs) of the
cabinet. Therefore, install the pallets or trays on the cabinet before
installing the device as follows. Use the level to check whether the pallets
or trays are horizontal. If not, adjust the fixed bolt of pallet or tray to
make the pallet or tray horizontal and then fasten it.
Pre-installed pallet or bracket
Check whether the floating nut for fixing the device is installed in the
square hole of the cabinet column. If not, insert the floating nut to the
square hole according to the position of the pallet or tray.
It is required that one device is placed on a pallet or a bracket. It is not
recommended to overlap multiple devices.
Check Switch & Accessories
After ensuring the installation environment requirements are met, open
the package and check whether the router and the accessories are
complete according to the purchase order.
If there is some missing or damaged items in the package, contact the
equipment dealer or sales.
During check, place router and accessories at safe place to avoid falling
down or impacting; keep the router far away from the places with liquids,
toxic gases and dust to avoid damages on the router.
When moving or checking the device, wear gloves to avoid the corrosion
of metal parts caused by perspiration.
Keep all packaging materials for later use during transporting.