Installation guide

14 SIGNAMAX LLC • www.signamax.eu
 The switch working place had better not be used with the
grounding settings of power devices or anti-thunder grounding
settings and the distance between them had better be as long as
possible;
 Be away from the strong power radio transmitters, radar
transmitter, and high frequency high-current equipments.
 Take elect
romagnetic shielding methods when necessary.
Anti-lightning
065-7434 Signamax 24-Port 10/100 L3 switch takes lots of measures in
anti-lightning, but when the lightning exceeds a certain volume, the
router may be damaged. To prevent the damages caused by lightning, do
as follows:
 Ensure that the protect ground of the chassis is well grounded;
 Ensure that the grounding point of AC power supply jack is well
grounded;
 Add power lightning arrester to the input end of the power supply,
so as to improve the anti-lightning capability of the power supply;
 To improve the anti lightning capability, the 065-7434 Signamax
24-Port 10/100 L3 Switch interface modules are connected to
outdoor signal lines. You can add special anti-lightning equipment
to the input end of signal lines.
Check Switch & Accessories
After ensuring the installation environment requirements are met, you
can open the package. However, before installation, check whether the
switch and the accessories are complete as per the purchase order.
Tools & Equipment
Tools
 Slotted point screwdriver/cross point screwdriver
 Level, ruler or tapeline
 Anti
-static equipment
Connected cables