Installation guide

9 SIGNAMAX LLC • www.signamax.eu
Modules
065-7434 Signamax 24-Port 10/100 L3 Switch modules include one POE
module and several kinds of AC/DC power modules.
POE15-8PSE Module
Ethernet Port Power Supply Control Module (POE15-8PSE)
POE15-8PSE module is used by 065-7434 Signamax 24-Port 10/100 L3
Switch to control the power supply of up to 24-port Ethernet interface.
Each Ethernet port provides up to 15W power. It serves as PSE and is
inserted in 065-7434 Signamax 24-Port 10/100 L3 Switch chassis. 065-
7434 Signamax 24-Port 10/100 L3 switch does not support this module.
Connection of POE15-8PSE Interface Module
POE15-8PSE module is directly inserted on two connectors of the device.
For details, refer to the chapter of “System Installation”.
Power Module (Mandatory)
065-7434 Signamax 24-Port 10/100 L3 Switch is a fixed device. The
power adopts the fixed structure. 065-7434 Signamax 24-Port 10/100 L3
Switch adopts dual power modules, which are hot backup for each other.
The power modules include two modes, including AC and DC. The user
can select single power module or dual power modules as desired. One
065-7434 Signamax 24-Port 10/100 L3 Switch must select one or dual
power modules. When dual power modules are selected, they must be
the combination of AC power and AC power or DC power and DC power.
AC power: 100 240V 50/60Hz, 60W
AC power: 100
240V 50/60Hz, 150W (provides power for one POE15-
8PSE module)
DC power: -40 -57V, 60W (only for the devices without POE function)