User`s guide

"Finish Port" field.
Finish Port
If the "Type" (above) is TCP, UDP, or TCP/UDP, this field can
be used to enter the end of range of port numbers. This can be
left blank if not required.
ICMP Type
If the "Type" (above) is ICMP, enter the ICMP type here.
Otherwise, this field should be left blank.
Access Control Log
To check the operation of the Access Control feature, an Access Control Log is pro-
vided. Click the View Log button on the Access Control screen to view this log.
This log shows attempted Internet accesses which have been blocked by the Access
Control function.
Data shown in this log is as follows:
Date/Time
Date and Time of the attempted access.
Name
If known, the name of the PC whose access was blocked.
Source IP address
The IP Address of the PC or device whose access request
was blocked
MAC address
The hardware or physical address of the PC or device whose
access request was blocked
Destination
The destination URL or IP address
SIGNAMAX LLC • www.signamax.eu 57