User`s manual

Signamax 065-1600 series Managed Media Converter
Publication date: October, 2005
Revision 1.0
85
Function name:
Auto Ping Configuration
Function description:
Auto Ping Configuration is used to test one or two target devices periodically
with a period of time, which is programmable. This can detect that if the target
device or the device itself is dead, and it helps you debug the network
problems. Signamax 065-1600 series can auto-ping two network devices at
the same time.
Parameter description:
Ping Interval:
This parameter is used to instruct Signamax 065-1600 series to
periodically ping the target device using the time interval you assigned.
Programmable time range: 1 – 60 minutes. Default: 10 minutes.
Host IP Address 1/2 and Current Default Gateway:
These are IP addresses with the format of version 4. For more
information, please see the section of IP address in Chapter 2.
Fig. 3-32