User`s manual

Signamax 065-1600 series managed media converter
Publication date: October, 2005
Revision 1.0
74
Flash Write Fail: E-mail, SMS and Trap
Default setting is as below:
E-mail : Do not send alarm message by E-mail when the device
happened “Flash Write Fail” event.
Default: Unchecked ()
SMS : Do not send short message to mobile phone when the
device happened “Flash Write Fail” event.
Default: Unchecked ()
Trap : Send Trap message to SNMP Trap Receiver when the
device happened “Flash Write Fail” event.
Default: Checked ()
FAN Abnormal: E-mail, SMS and Trap
E-mail : Send “FAN Abnormal” alarm message by E-mail when the
FAN was abnormal. Default: Unchecked ()
SMS : Send “FAN Abnormal” alarm message by Short Message
System when the FAN was abnormal.
Default: Unchecked ()
Trap : Send Trap message to SNMP Trap Receiver when the FAN
was abnormal. Default: Checked ()
FAN Normal: E-mail, SMS and Trap
E-mail : Send “FAN Normal” alarm message by E-mail when the FAN
was normal. Default: Unchecked ()
SMS : Send “FAN Normal” alarm message by Short Message
System when the FAN was normal. Default: Unchecked ()
Trap : Send Trap message to SNMP Trap Receiver when the FAN
was normal. Default: Checked ()
FAN/Temperature Fail: E-mail, SMS and Trap
E-mail : Send “FAN/Temperature Fail” alarm message by E-mail
when the FAN was abnormal and Temperature was over
60
o
C at the same time. Default: Unchecked ()
SMS : Send “FAN/Temperature Fail” alarm message by Short
Message System when the FAN was abnormal and
Temperature was over 60oC at the same time.
Default: Unchecked ()
Trap : Send Trap message to SNMP Trap Receiver when the FAN
was abnormal and Temperature was over 60oC at the same
time. Default: Checked ()