User`s manual

Signamax 065-1600 series Managed Media Converter

Publication date: October, 2005

Revision 1.0

3-4-9. Trap/Alarm Configuration

Function name:

Trap Events Configuration

Function description:

The Trap Events Configuration function is used to enable the Managed Media

Converter to send out the trap information while pre-defined trap events

occurred. Signamax 065-1600 series offers 16 different trap events to users

for converter management. The trap information can be sent out in three ways,

including e-mail, mobile phone SMS (short message system) and Trap. The

message will be sent while users tick () the trap event individually on the

web page shown as below.

Fig. 3-24

Parameter description:

STP Topology Changed: E-mail, SMS and Trap

E-mail : Send “STP Topology Changed” alarm message by E-mail

when the STP topology changed event happened.

Default: Unchecked ()

SMS

: Send “STP Topology Changed” alarm message by Short

Message System when the STP topology changed event

happened. Default: Unchecked ()

Trap : Send Trap message to SNMP Trap Receiver when the STP

topology changed event happened.

Default: Checked ()