User`s manual

Signamax 065-1600 series Managed Media Converter
Publication date: October, 2005
Revision 1.0
69
3-4-8. VLAN Configuration
VLAN configuration is used to partition your LAN into small ones as your
demand. Properly configuring it, you can gain not only improving security and
increasing performance but greatly reducing VLAN management.
Signamax 065-1600 series supports Tag-based VLAN (802.1q) as well as
protocol VLAN (802.1v). Tag-based VLAN (802.1q) also associates with GVRP for
the management of dynamic tag-based VLAN. You can make VLAN configurations
via the function VLAN Enable/Disable (VLAN State Setting) and VLAN Port VID
Setting to configure VLAN parameters in the web user interface.
Function name:
VLAN Enable/Disable (VLAN State Setting)
Function description:
The VLAN State Setting function includes two modes: Disable and Enable, you
can choose one of them by pulling down the list and pressing the
<Downward> arrow key. Then, click <Apply> button, the settings will take
affect immediately.
Parameter description:
VLAN Mode:
Disable:
Stop VLAN function on Signamax 065-1600 series. In this mode, no
VLAN is applied to Signamax 065-1600 series. This is the default
setting.
Enable:
Effect VLAN function on Signamax 065-1600 series. In this mode,
VLAN is applied to Signamax 065-1600 series.
Fig. 3-22 VLAN State Setting