User`s manual

Signamax 065-1600 series managed media converter

Publication date: October, 2005

Revision 1.0

Parameter description:

SNMP

SNMP enable/disable selection. Default is “Enable”.

Get Community:

User-definable community name for the authentication of SNMP Get

community, the default is “public”.

Set Community:

User-definable community name for the authentication of SNMP Set

community, the default is “private”.

Trap Host 1 IP Address:

To set up a trap host IP address in order to receive Signamax 065-1600

series’ trap message. The default host 1 IP address “0.0.0.0” means that

the transmission of trap message to host 1 is disabled.

Community: (Host 1)

User-definable community name for the authentication of SNMP Trap

community for host 1, the default is “public”.

Trap Host 2 IP Address:

This parameter setting is the same as “Trap Host 1 IP Address”.

Community: (Host 2)

This parameter setting is the same as “Community (Host 1)”. The default

is “public”.

Trap Host 3 IP Address:

This parameter setting is the same as “Trap Host 1 IP Address”.

Community: (Host 3)

This parameter setting is the same as “Community (Host 1)”. The default

is “public”.

Trap Host 4 IP Address:

This parameter setting is the same as “Trap Host 1 IP Address”.

Community: (Host 4)

This parameter setting is the same as “Community (Host 1)”. The default

is “public”.