User`s manual

Signamax 065-1600 series Managed Media Converter
Publication date: October, 2005
Revision 1.0
211
rc2201LinkUpConf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
-- @@ACTION trapconf_mib
DESCRIPTION
"Get/Set the link-up status of E-mail, SMS and trap configuration.
We use a 3-bit mask to present the status.
bit0 means Email State, bit1 means SMS state and bit2 means trap
state.
If you want to send the E-mail alarm and trap, set the oid value with
5.
value range (1 - 7)."
::= { rc2201TrapEventConfMIB 4 }
rc2201AuthFailConf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
-- @@ACTION trapconf_mib
DESCRIPTION
"Get/Set the auth-fail status of E-mail, SMS and trap configuration.
We use a 3-bit mask to present the status.
bit0 means Email State, bit1 means SMS state and bit2 means trap
state.
If you want to send the E-mail alarm and trap, set the oid value with
5.
value range (1 - 7)."
::= { rc2201TrapEventConfMIB 5 }
rc2201StpTopoChangedConf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
-- @@ACTION trapconf_mib
DESCRIPTION
"Get/Set the StpTopoChanged status of E-mail, SMS and trap
configuration.
We use a 3-bit mask to present the status.
bit0 means Email State, bit1 means SMS state and bit2 means trap
state.
If you want to send the E-mail alarm and trap, set the oid value with
5.
value range (1 - 7)."
::= { rc2201TrapEventConfMIB 6 }
rc2201StpDisabledConf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
-- @@ACTION trapconf_mib