User`s manual

Signamax 065-1600 series managed media converter
Publication date: October, 2005
Revision 1.0
210
"Get/Set the IP Address of destination of AutoPing ."
::= { rc2201AutoPingEntry 2 }
-- Trap Event Configuration Function
--------------------------------------------------------------------
rc2201TrapEventConfMIB OBJECT IDENTIFIER ::= { rc2201Produces 6 }
rc2201ColdStartConf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
-- @@ACTION trapconf_mib
DESCRIPTION
"Get/Set the cold-start status of E-mail, SMS and trap configuration.
We use a 3-bit mask to present the status.
bit0 means Email State, bit1 means SMS state and bit2 means trap
state.
If you want to send the E-mail alarm and trap, set the oid value with
5.
value range (1 - 7)."
::= { rc2201TrapEventConfMIB 1 }
rc2201WarmStartConf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
-- @@ACTION trapconf_mib
DESCRIPTION
"Get/Set the warm-start status of E-mail, SMS and trap
configuration.
We use a 3-bit mask to present the status.
bit0 means Email State, bit1 means SMS state and bit2 means trap
state.
If you want to send the E-mail alarm and trap, set the oid value with
5.
value range (1 - 7)."
::= { rc2201TrapEventConfMIB 2 }
rc2201LinkDownConf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
-- @@ACTION trapconf_mib
DESCRIPTION
"Get/Set the link-down status of E-mail, SMS and trap configuration.
We use a 3-bit mask to present the status.
bit0 means Email State, bit1 means SMS state and bit2 means trap
state.
If you want to send the E-mail alarm and trap, set the oid value with
5.
value range (1 - 7)."
::= { rc2201TrapEventConfMIB 3 }