User`s manual

Signamax 065-1600 series Managed Media Converter

Publication date: October, 2005

Revision 1.0

2-2-3-2. Installing Management Station through Signamax 065-1600 series TP

Port

In Fig. 2-7, it is a simple example to show you the first step to connect to your PC

and the converter.

1. Attach Cat. 5 TP cable to connect PC and TP port of the Signamax 065-1600

series converter.

2. Boot up the converter.

3. Either run a terminal simulator and invoke a telnet session on PC, or run

browser software.

Right now, you can read the menu with text screen as Fig. 2-8. Input the default

username “admin” and the default password “admin”, and then you will read the

next page as Fig. 2-9.

Use the <Up/Down> arrow keys to move the cursor to locate the entry of the

Configuration in the menu, and then press <Enter> key on the PC to select the item.

Now, the page for IP address configuration is shown and then also moves the

cursor to the entry of the IP Configuration, then press <Enter> key to select the item

you choose.

Network Management Station through

Signamax 065-1600 series TP Port

Assign a reasonable IP address,

for example:

IP = 192.168.1.2

Subnet Mask = 255.255.255.0

Default Gateway = 192.168.1.254

RC-2201/02

Default IP Setting:

IP = 192.168.1.1

Subnet Mask = 255.255.255.0

Default Gateway = 192.168.1.254

Fig. 2-7

Ethernet LAN