User`s manual

Signamax 065-1600 series managed media converter
Publication date: October, 2005
Revision 1.0
150
4-4-8. VLAN Configuration
VLAN configuration is used to partition your LAN into small ones as your
demand. Properly configuring it, you can gain not only improving security and
increasing performance but greatly reducing VLAN management.
Signamax 065-1600 series supports Tag-based VLAN (802.1q) as well as
protocol VLAN (802.1v). Tag-based VLAN (802.1q) also associates with GVRP for
the management of dynamic tag-based VLAN. You can make VLAN configurations
via the function VLAN Enable/Disable (VLAN Status) and VLAN Port VID Setting to
configure VLAN parameters in the console management.
Function name:
VLAN Enable/Disable (VLAN Status)
Function description:
The VLAN Mode function includes two modes: Enable or Disable, you can
choose one of them by pressing <Space> key. Then, move the cursor to
<Save> and press <Enter> key, the setting will take affect immediately.
Parameter description:
VLAN Status:
Disable:
Stop VLAN function on Signamax 065-1600 series. In this mode, no
VLAN is applied to Signamax 065-1600 series. This is the default
setting.
Enable:
Effect VLAN function on Signamax 065-1600 series. In this mode,
VLAN is applied to Signamax 065-1600 series.
Fig. 4-41 VLAN Status