User`s manual

Signamax 065-1600 series Managed Media Converter
Publication date: October, 2005
Revision 1.0
107
Parameter description:
Refresh Interval:
A Refresh Interval selection is used to set or change web view counters
refresh period. It can be set from 3 seconds to 10 seconds.
TP Port:
Ethernet 10/100/1000Mbps UTP interface of Signamax 065-1600 series.
Fiber Port:
The Ethernet 1000 Mbps Fiber interface of the Signamax 065-1600
series converter.
Tx Good Packet:
The counting number of the packet transmitted successfully.
Rx Good Packet:
The counting number of the packet received which is treated as good.
Tx Byte:
Total transmitted bytes.
Rx Byte:
Total received bytes.
Tx Bad Packet:
The counting number of the packet transmitted abnormally.
Rx Bad Packet:
The counting number of the packet received which is treated as bad.
Collision Counter:
Collision times.
Tx Abort Packet:
The counting number of the packet aborted during transmission.
Tx Speed (bps):
Show the average transmission rate in bit per second. The time interval
is user-defined.
Rx Speed (bps):
Show the average received data rate in bit per second. The time interval
is user-defined.
Broadcast Packets Received:
Show the counting number of the broadcast packet.